Micro channel parallel circulation radiator specialist producer
The condenser-a part of the air conditioning circuit-is integrated into the motor cooling module, the place it is utilized to amazing down and condense the compressed, gaseous refrigerant from the compressor. We create brazed, flat tube condensers that deliver higher performance in spite of their compact and light-weight layout. They guarantee quick cooling of the passenger compartment thanks to the best possible matching of heat transfer and pressure drop on each the coolant and the air side.
The condenser is a heat exchanger in a cellular A/C method. These days, condensers are typically created of aluminum, but in the past, some have been created of copper/brass. Condensers look very much like radiators, just a small thinner, and given that they also count on air flowing by means of them, are usually found in entrance of the radiator.
Like radiators and evaporators, condensers are also created as a series of tubes with fins close to them. its job is to launch heat. Far more especially, to release the heat the refrigerant absorbed while it was flowing by way of the evaporator, very a lot the same way the radiator releases the warmth from motor coolant that the coolant absorbed while it was flowing via the engine. The refrigerant enters the condenser as a high-strain vapor, but as it flows by way of the condenser and cools, it turns back again into a cooler high-stress liquid.
Product features
1 adopt low height fins and multiple flat pipes to increase the heat dissipation area and improve the heat dissipation performance.
2 fin special treatment to enhance lodging resistance and maintain the tidiness of the products’ appearance
3 powder coating on the products can enhance corrosion resistance and improve product life cycle.
4 none- argon arc welding solder products look different.
5 every product’s pressure is maintained by using nitrogen so the product is free from leakage at 100% before it leaves the factory
Firm Edge
1. Generic products are supposed to be manufactured strictly according to the installation standard of the original factory, in this way to ensure the accurate installation for the users.
2. This special design for the pin not only enhances its lodging resistance,ensure the visual appearance tidy but also reduces the air blockage chance, it also allows more heat dissipation area to improve heat transfer performance. In that way, the air conditioning system can achieve its expected function more efficiently.
three. Part of the products uses galvanised microchannel flat tube as material or adopt the powder coating treatment, in order to improve products’ corrosion resistance and prolong the service life.
four. By machining core into different thickness and wave distance and changing the amount of holes in flat tube,we can improve the heat dissipation efficiency of condenser of the product, lower down the system compression power, save fuel and improve economic efficiency.
five.CZPTy product is double checked and a pressure-holding device is installed to ensure that every product is 100% leak-free before it leaves the factory.
six. The company with a complete production chain, is focused on the developing new products, and keeping tracking of products to ensure the timeliness of all product supply, and also enhance the flexibility of enterprise operation.
seven.Only when we have an independent team with high efficiency can we satisfy CZPT demands.
OUR SERVICES
Lengthy time period organization is based on our dependable providers, quickly respond and our expert experience to Automobile AC. We are going to turn out to be your associate, not just your supplier.
one.CAD Drawing, and mould design foundation on your sample
two.Mould take a look at and sample verification ahead of mass generation.
3.CZPTers of various delivery lines.
four.aggressive freight delivers and 1-quit services on clearing, shipping issues.
FAQ
| Q1. Are you a factory or buying and selling organization? | A: we are a self -personal manufacturing facility, we give one particular-end service for our consumers, from spare areas to condenser, from complex product sales to transport and to right after-revenue, so as to save the cost for consumer, control the high quality and lead time, provide the best companies |
| Q2: In which is your manufacturing facility positioned? How can I pay a visit to there? | A: Our manufacturing facility is located in HangCZPT, Shan dong, China. The closest airport is ZheJiang Yaoqiang airport or HangCZPT Liuting airport. |
| Q3. What’s the production time for new molds and mass production? | A: 7-10 times to construct the new moulds, mass manufacturing will take about 20-25days for one 20gp,twenty five-30days for one particular 40hq, can procedure urgently if want. |
| This autumn: What is the payment conditions? | A: Telegraphic Transfer (T/T) and Letter of Credit score (L/C). |
| Q5: Can you ship me samples? | A: Sure, Samples are for free of charge, and freight is on your side. |
